Remote view from web browser, iPhone support, grid based motion detect and many other feature improvements.
MJPEG video stream support for network IP cameras. Any IP camera that
can output unencoded M-JPEG stream will work with XtraSense now.
Fixed the bug which may cause video distortion for IP camera with video resolution other than 320x240
Fixed bug which caused FTP appending mode not working if user click
"FTP" button without enable "Upload frames to FTP server" option in
camera configuration page. - R060717
Fixed window display problem on screen with font set to any size other than 96DPI. -R060717
Improved motion detecting sensitivity.
- Added "Re-connect" button for each camera on main screen
- Added user authentication support for IP cameras
- Added additional motion detecting sensitivity control. Two sets of
sensitivities are available for automatic switching according to preset
time. - R060717
Fixed "ComProperty: Registry error"
bug when trying to run XtraSense on a computer without serial com port.
The serial com port is used by XtraSense for SMS alarm
- Press and hold left CTRL key when left click on video will bring it
to full window size.
- Individual zoom control(digital) for cameras on main monitoring screen
- Individual video filters in camera configuration module to
adjust picture brightness, contrast, hue, saturation, sharpness, white
balance, gamma, and gain.
default video is displayed at its original size. An option to
fit video to window has been added to "General Options" page.
Fixed bugs which may cause system hang
when configuring cameras
camera configuration features
the bug which limits maximum video resolution to 320x240.
Fixed the bug which causes Log Analyzer to crash if system is
using non-US date time format.
The 'view' button in IP camera configuration page works now.
Revised help files.
Improved camera configuration page.
Fixed some minor bugs.
supports network IP cameras now:
a. Supports any camera with
direct image access
(has direct URL to capture camera video frame). For example, the direct
image access URL for AXIS 2100 is
b. Added camera lost detection for IP cameras. System will try to
reconnect every 15 seconds if a connection to camera is lost.
LogAnalyer is upgraded to v1.33 with improved
start up and searching speed.
Added "Quit XtraSense" task in scheduler.
Set default audio recording quality to 8Khz/Mono when using GSM 6.10
Added track bar for easy codec qulaity adjustment.
Removed minimize to tray feature as it causes system unstability due to
Windows XP tray icon notification bug.
Added "Empty Cache" button to allow clearing of all pending files for
email and FTP.
For computers using on-board Intel 82865 Graphics controller, XtraSense
will exit randomly if motion detect is on
Bug Fixed: XtraSense didn't send video clips
through FTP or email
Bug Fixed: Xvid codec performance window pops out if you
reset the codec settings.
Start from version 1.3, XtraSense
default video encoding format from WMV to XvidD MPEG to better support
multiple camera system. XviD tends to consumes less recsources in
multi-thread mode and give user more flexibilty to configure codec
quality. After upgrading to version 1.3, existing users can still
access WMV video files recorded by previous versions.
Reduced memory usage under multi-threading video
Allows user to choose which video and audio codec to use
Allow user to configure codecs
Log Analyzer displays video time stamp based on video recording date,
time and length instead of burning timestamp to video.
Auto creating of log folder if delted by user.
Bug Fixed: Solved "Closed dataset" problem when
log drive is full
Bug Fixed: Video lag when creating motion mask in preview window
Added audio support for all channels
Added "launch external program" option to on motion detect and on
sensor trigger event
Added sensor triggered video recording
Added master control feature to control XtraSense through parallel port
by external device
Added option to run program on Windows starts
Added meter to show current motion level on camera setup page
Added "delete logs older than 1 day" options in Log Analyzer
Added "delete selected items" feature in Log Analyzer
Added support for screen resolution lower than 1024x768
Added "Arm system" task in scheduler
Added blue blinking LED on main interface to indicate current system
status (armed or disarmed)
Motion masks on camera setup page were made transparent for easy
Alarm notification email now supports video attachment
FTP upload now supports video
Last view setting will be saved
Cancel login will clear login fields
Multiple email addresses separated by ";" is allowed for report and
alarm notification email.
Visual map will be automatically resized to fit current window.
Bug Fixed: When multiple sensors are triggered, only first sensor's
alarm notification is sent.
Bug Fixed: External sensor status could not be read
Improved log database access speed